JT Harness Tutorial

for JT Harness Version 4.x
 

This tutorial introduces you to the JT harness version 4.4.1 GUI and some basic underlying concepts. The tutorial instructions have you run a very simple test suite called Demo Test Suite that is included in the examples directory. Demo Test Suite contains 17 tests that test the functionality of some very simple demo APIs.

This tutorial describes how to:

The tutorial should be run using version 6.0 (or later) of the Java™ Platform, Standard Edition (Java SE) on either the Microsoft Windows (Win32) platforms, or on the Solaris™ Operating System.

NOTE: Unless otherwise indicated, all examples in this book use UNIX style command prompts and file separators.

To keep things simple, these instructions show you how to run both the JT harness and the tests on the same system in different virtual machines for the Java platform (JVM™ machines). The following diagram illustrates this:

Figure 1: JT Harness and Tests Running on Same System1


Start the JT Harness

  1. Verify that Java SE version 6.0 (or later) is in your path.

    At a command prompt, enter:

    java -version

  2. Make jt_installexamples/demots the current directory.

    The directory jt_install is the directory into which you installed the JT harness software.

  3. Start the JT harness.

    At a command prompt enter:

    java -jar lib/javatest.jar -newDesktop

    Note: The -newDesktop option is used here to ensure that the JT harness starts up exactly as described in these instructions. Under normal circumstances you should not use this option because you will lose information that the harness saved about your previous session. For information about JT harness options, see the JT harness online help.

The JT harness starts and displays the Quick Start wizard window:

Figure 2:  The JT Harness with QuickStart Wizard


Quick Start Wizard

The Quick Start wizard leads you through the basic steps required to start running the test suite.

  1. Panel 1: Welcome to the JT Harness

    Choose "Start a new test run", and click Next

  2. Panel 2: Test Suite

    Click the Next button (accept the default).

  3. Panel 3: Configuration

    Choose "Create a new configuration", and click Next

  4. Panel 4: Work Directory

    The JT harness uses the work directory to store information and to write test results. Click the Browse button to activate a file chooser. Use the file chooser to create a work directory. Be sure to create the work directory in a convenient location outside of the test suite directory (demots). Click Next.

  5. Panel 5: Almost Done ...

    Click the Finish button to complete the Quick Start process. The configuration editor window starts automatically.


Configure the Test Information

Because the "Start the configuration editor" checkbox was checked in the last panel of the Quick Start wizard, the configuration editor starts automatically.

You use the configuration editor to configure the information required to run the test suite. As shown below, the configuration editor consists of three panes and a menu bar:

Figure 3:   JT Harness Configuration Editor

The left pane lists the titles of the questions you have answered, are currently answering, or that the editor deduces must be answered. The current question is highlighted.

The center pane displays the interview questions. You answer the questions by using controls such as text boxes, radio buttons, or combo boxes located below each question. Whenever possible, the editor deduces answers from your system configuration and includes them in text boxes, combo boxes, and radio buttons. You can accept these answers or provide other answers.

The right pane displays important information about each question, such as:

Answer the Questions in the Configuration Editor

The following table presents the titles, answers, and information about each question that you must answer in the interview. There are 13 questions in the Demo Test Suite interview.

TABLE 1: Tutorial Interview Questions and Answers

Question Answer Description
Welcome
Briefly describes the purpose and function of the Demo Test Suite configuration interview.
Configuration name Demo_TS Names the interview file.
Description Tutorial Defines the configuration
How to Run Tests On this computer Runs both the JT harness and the tests on the same computer.
Java Virtual Machine The absolute path to the java command on a Win32 system. For example:

jdk_inst_dir/bin/java.exe

or

jre_inst_dir/jre/java.exe

Click the Browse button to activate a file chooser, or type the path directly in the text box.
Test Verboseness Medium Causes all executing tests to emit standard information messages.
Parameters...
Introduces the section of questions that collect information about which tests to run and how to run them.
Specify Tests to Run? No Runs all of the tests.
Specify an Exclude List? No Specifies that an exclude list is not used for this test run.
Specify a Known Failures List? No Specifies that a known failures list is not used for this test run.
Specify Status? No Specifies that prior run status is not used to filter the test run. Feel free to try it on subsequent runs.
Concurrency 1 Specifies the default concurrency setting (1).
Time Factor 1 Specifies the default standard time out value for each test (1).
Congratulations!
The configuration editor has collected all of the information it needs to run the tests.

Click the Done button to save the interview. JT harness interviews are saved to files that end with the .jti suffix. Use the file chooser to specify a file in a convenient location.


Run Tests

  1. Set the view filter to Last Test Run.

    Choose "Last Test Run" in the View Filter combo box located in the tool bar. This changes your "view" of the test tree so that you only see the results of the current test run. This is generally the view that most users prefer to begin with.

    Note: When you change to the Last Run filter before you do a test run, the folders and tests in the tree turn to gray indicating that they are filtered out. This occurs because there are currently no results from a "last test run".

  2. Choose Run Tests > Start to start the test run.

    The test suite should begin to run. You will see activity in the test tree panel that indicates which tests are running. You can also watch the progress of the test run in the progress monitor on the bottom-right portion of the JT harness window and the pie chart in the Summary tab.

  3. Expand the test tree folders to reveal the tests.

    Click on different test folders to expand the test tree.

    Figure 4:   Expanded Test Tree

As tests complete, the tests and their folders change color to represent their state. The following table briefly describes the colors and their meaning:

TABLE 2: Folder/Test Colors and Their Meaning

Color Description
Green Passed
Red Failed
Blue Error - The test could not be run properly. Usually indicates a configuration problem.
Gray Filtered out - Due to a parameter setting (for example, it is on an exclude list), the test is not selected to be run.
White Not run

Folders reflect the state of the tests hierarchically beneath them. You know that the entire test suite passed if the test suite root folder is green. See the JT harness online help for more information.

Note: The test lists/DoublyLinkedList/InsertTest.java intentionally contains errors and is supposed to fail as part of the tutorial. If any other tests fail, check your answers to the configuration interview.


Browse the Results

Now that the test run is complete, you will use the Folder tabbed pane and Test tabbed pane portion of the JT harness to examine the results. You will also examine the output of the test that failed.

Note: The Folder tabbed pane and the Test tabbed pane occupy the same portion of the Test Manager window. The Folder tabbed pane is displayed when you choose a folder entry in the test tree and the Test tabbed pane is displayed when you choose a test entry in the test tree.

The Folder Pane

The Folder tabbed pane displays information about the tests in the selected folder.

Figure 5:  The Folder Pane

  1. Click on the top folder in the test tree (the test tree root).

  2. Click on the Summary tab (shown by default).

    Notice the statistics displayed in the Summary panel. It describes how many tests in the test suite passed, failed, had errors, and were filtered out.

  3. Click on any of the other folder icons in the test tree.

    Notice that the Summary panel changes to reflect the statistics for tests hierarchically beneath it.

  4. Click on the test tree root folder again.

  5. Click on the Passed tab.

    This pane contains a list of the tests that passed during the test run.

  6. Click on the Failed tab.

    This pane contains a list of the tests that failed during the test run (only one test in this case).

  7. Double-click the lists/DoublyLinkedList/InsertTest.java test in the Failed tab.

    This automatically selects the test in the test tree and changes the display from the Folder pane to the Test pane.

Note: To read more information about any of the panes, click on a tab to establish focus, and press F1 to activate online help about that pane.

The Test Pane

The Test tabbed pane displays information about the selected test. The five tabs provide information about the test and information about the results of its execution.

Figure 6: The Test Pane

  1. Click on the different tabs and examine the information the panes contain.

    The following table briefly describes each tabbed pane:

    TABLE 3: Test Pane Tabs

    Tab Description
    Test Run Messages Displays messages generated during the selected test's execution
    Test Run Details A table of values generated during the selected test's execution
    Configuration A table of the configuration values used during the selected test's execution
    Files Displays the Java language source code and any other files related to the selected test
    Test Description A table of the test description values specified for the test

    Note: To read more information about any of the panes, click on a tab to establish focus, and press F1 to activate the online help about that pane.

  2. Click on the Test Run Messages tab.

    This pane provides access to any messages generated by the JT harness or the test during execution. Notice that the various red icons indicate that the test failed.

  3. Click on the Execute/Messages entry in the left hand column.

    The display on the right shows the command line used to run the test. Problems can often be debugged by examining how the test was invoked. In this case it was invoked correctly.

    Figure 7: Test Messages

  4. Click on the out1 entry in the left-hand column.

    The display on the right shows errors reported by the test. The messages indicate that either the test or the API contain errors - in this case the test contains errors.

    Figure 8: Logged Error Messages


    Exclude a Failed Test

    The JT harness allows you to "exclude" tests from a test suite by specifying an exclude list file. This section shows you how to use the quick set mode of the configuration editor window to specify an exclude list that includes lists/DoublyLinkedList/InsertTest.java. Tests that are excluded are not executed during test runs, and though they are still displayed in the test tree, their status is not reflected in the pass/fail status of the test suite.

    1. Choose Configure > Edit Configuration > Exclude List from the test manager menu bar.

      The configuration editor window opens directly to a panel that allows you to specify an exclude list. This quick set mode allows you to quickly change values that change frequently between test runs. These values are also referred to as standard values. Note that standard values can also be changed using the configuration editor window in question mode.

    2. In the Exclude List pane, click Other.

      This activates a tool with which you can specify a set of exclude lists.

    3. Click the Add button on the upper right portion of the tool.

      This invokes a file chooser with which you can specify an exclude list. The current directory of the file chooser should be the directory in which you started the JT harness. If it is not, please navigate to that directory.

    4. Double-click on the lib directory entry in the file chooser.

    5. Choose the demo.jtx entry in the file chooser and click Select.

      Notice that the exclude list (demo.jtx) is added to the Exclude Lists text box.

    6. Click Done in the configuration editor.

    7. Change the view filter to "Current Configuration".

      The Current Configuration filter shows which tests are selected and filtered out in the configuration, in effect a filter that shows which tests will be run next, as opposed to the Last Test Run filter which shows the tests that were run.

      Notice that the icon for the for InsertTest.java entry in the Test tree changes from red to gray. This indicates that the test has been filtered out and will not be executed. Also notice that the Test Suite Root folder has changed from red to green, indicating that all the currently selected tests have passed.


    Generate a Report

    You can use the JT harness to generate an HTML report that describes the results of the test run. All of the information contained in the report is available from the GUI; however, the following steps describe how to generate and browse a report that describes the test run done in the previous sections of this tutorial.

    1. Choose Report > Create Report

      The Create a New Report dialog box opens.

    2. Specify the directory in which you want the report files to be written

      If you wish to use a file chooser to specify the directory, click on the Browse button.

    3. Click the Create Report(s) button

      The reports are generated and you are asked whether you want to view the report.

    4. Click Yes

      The reports are displayed in the JT harness report browser window. Scroll through the report and follow the various links to view data about the test run.

    Note: If you wish to print the report, you can open the report in your favorite web browser and print it from there.


    Summary

    This tutorial touches only on the core functionality of the JT harness GUI. Please continue to explore additional functionality on your own. Also, please consult the online help for information about all of the JT harness features.

    1. It is also possible to run the JT harness and the tests on separate systems using the JT harness agent.

    Copyright © 2002, 2011, Oracle and/or its affiliates. All rights reserved.